SMC液压缸CDQSB12-10D-M9NV的技术指导

SMC液压缸CDQSB12-10D-M9NV的技术指导

(JISB1176, strength class 10.9 or higher) for cylinder mounting.
(ø20: 2 pcs.; ø32 to ø100: 4 pcs.)
 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
 build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
3. Make sure that the interlocking length of the rod end thread (male or female thread)
 and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time,
be sure to release the air inside the cylinder and the piping. When the air release is complete,
 operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure.
5. Since Series CH
QB does not have an air release plug, release air from other components (e.g. from piping, etc.) as well.
6. When mounting the cylinder body with mounting bolts, use the tightening torques in the table at right as a guide
(JISB1176, strength class 10.9 or higher) for cylinder mounting.
(ø20: 2 pcs.; ø32 to ø100: 4 pcs.) 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
 (JISB1176, strength class 10.9 or higher) for cylinder mounting. (ø20: 2 pcs.; ø32 to ø100: 4 pcs.)
 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
 3. Make sure that the interlocking length of the rod end thread (male or female thread) and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time,
be sure to release the air inside the cylinder and the piping. When the air release is complete, operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure. 5. Since Series CH
QB does not have an air release plug,
 release air from other components (e.g. from piping, etc.) as well. 6. When mounting the cylinder body with mounting bolts,
 use the tightening torques in the table at right as a guide
3. Make sure that the interlocking length of the rod end thread (male or female thread)
and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time, be sure to release the air inside the cylinder and the piping。
 When the air release is complete, operate the cylinder at reduced pressure,
 then gradually increase it to the normal operating pressure.
 5. Since Series CH
QB does not have an air release plug,
 release air from other components (e.g. from piping, etc.) as well.
6. When mounting the cylinder body with mounting bolts,
use the tightening torques in the table at right as a guide

SMC液压缸CDQSB12-10D-M9NV的技术指导 手机：17321017802（微信）
邮箱：17321017802@163.com
电话：021-39529829
传真：021-39529831-8007
联系人：
公司：上海乾拓贸易有限公司