TURCK接近开关订货号1055002

TURCK接近开关订货号1055002

图尔克接近开关选型资料：
焊接传感器有不同的版本，不同的信号强度和直径。
The spares have to be made of ferromagnetic material
in order to guarnatee correct performance.
Mostapplications need center bolts to retain the welding nutsand reinforcing sleeves and thus provide mechanical
protection of the sensors.
因此可以检测到其材料属性中十分不同的铁磁元件。
工作电压 10…30 VDC
余波 ð 10 % Uss
直流额定工作电流 ð 200 mA
空载电流 I0 ð 15 mA
漏电流 ð 0.1 mA
The magnetic field sensor for detection of
ferromagnetic parts is espcially suited for the detection
of welding nuts as well as spacer or reinforcing sleeves.
灵敏区域的距离 S=11mm
当出现被测物时，在灵敏区域内的传感器信号将会发生变化。
的区域距离 M=14mm
假设灵敏区域能够被完全覆盖，那么信号强度能够达到值。
Theses bolts have to bemade of non-ferromagnetic material, like stainless steelfor example.
Center bolts are not available at Turck, asthese have to be produced individually and adjusted tothe correspondent application.
The weld sensor detects targets with diametersbetween 10 and 20 mm easily
隔离测试电压 ð 0.5 kV
短路保护 是/ 循环
压降在 Ie ð 1 V
断路/反极性保护 是/ 是
输出** 3线, 可编程式连接, PNP
被测物必须被置于所谓的灵敏区域，以便能被检测到。
如果被测物能够完全覆盖灵敏区域，传感器内部信号将达到强度。部分覆盖也能够被测到。

TURCK接近开关订货号1055002