SMC带阀气缸,SMC气缸技术

SMC带阀气缸,SMC气缸技术
Strip 3.2 to 3.7 mm at the end of the lead wires, insert the
This can cause disconnection of the connector and breakage
of the lead wire. If this is unavoidable due to the application,
keep the bending radius of the lead wire R8 mm at least
ends of the core wires evenly into the sockets, and then crimp
with a crimping tool. When this is done, take care that the coverings

SMC带阀气缸,SMC气缸技术

of the lead wires do not enter the core wire crimpingarea.
For crimping, use a specific tool. (For special crimping tool,
Insert the sockets into the square holes of the connector ( ,
indication), and continue to push the sockets all the way in until
they lock by hooking into the seats in the connector. (When
they are pushed in, their hooks open and they are locked automatically.)
Then confirm that they are locked by pulling lightly
SMC带阀气缸,SMC气缸技术