美国ASCO气动阀,世格气动阀产品**  

美国ASCO气动阀,世格气动阀产品**  
 For "Quick Exhaust" valves, pressure port
is 1/20", exhaust port is 1/4".
 IMPORTANT: A Minimum Operating Pressure Differential
There are two exhaust flows in the exhaust mode
(pilot and main). The pilot exhaust must be
connected to the main exhaust when the air or
inert gas cannot be exhausted to atmosphere.
Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must
be installed in the cylinder lines only.

美国ASCO气动阀,世格气动阀产品**  

Available in 4 different coil terminations
• H Class coil construction
• Designed solely for installation in intrinsically safe
or NIFW areas, with properly approved and sized
limiting barriers
These solenoid valves are intended for use on clean
dry air or inert gas, filtered to 40 micrometres or better.
The dew point of the media should be at least 10°C
(18° F) below the minimum temperature to which any
美国ASCO气动阀,世格气动阀产品**